Descriere

CYPECAD M54 + CYPE 3D M28 este o soluție care combină cele mai puternice programe CYPE pentru proiectare și analiză structurală. Caracteristicile sale acoperă proiectarea diferitelor elemente structurale din beton armat, cum ar fi stâlpi, grinzi și grinzi de cuplare, plăci (plăci de tip dală, plăci post-tensionate, plăci compozite, plăci pentru scări și rampe), plăci cu nervuri (prefabricate, generice și in-situ, din oțel și lemn și plăci casetate. Include opțiuni pentru proiectarea diferitelor tipuri de fundații, cum ar fi fundații, piloți, plăci și grinzi de fundare. Include opțiuni pentru proiectarea stâlpilor și grinzilor din oțel și lemn. Include module suplimentare pentru proiectarea pereților din blocuri de beton, a pereților din beton armat, a pereților plane sub tensiune și a pereților din zidărie. Include instrumente pentru proiectarea și analiza îmbinărilor dintre profilele de oțel, precum și proiectarea și verificarea plăcilor de bază. Pot fi analizate clădirile supuse încărcărilor seismice și chiar pot fi verificate cerințele pentru proiectarea seismică a nodurilor din beton armat. Tasarea în fundație și interacțiunea acesteia cu restul structurii, în termeni de forțe și deformări, pot fi luate în considerare. Programul verifică starea limită finală la străpungere în plăci casetate, plăci dală și radiere generale. De asemenea, verifică rezistența la foc a elementelor din oțel și proiectarea secțiunilor sau a straturilor de protecție în funcție de materialul corespunzător. Are caracteristici pentru proiectarea îmbinărilor sudate și cu șuruburi de diferite tipuri, inclusiv îmbinarea dintre secțiunile duble în T și cele circulare tubulare. Programul permite utilizatorilor să efectueze analiza neliniară a structurilor constând din bare și noduri utilizând motorul de analiză OpenSees©. Oferă un instrument pentru modelarea BIM și detalierea armăturilor în elementele structurale din beton armat. Dispune de un asistent pentru generarea automată a structurii folosind două metode: importul de fișiere în format IFC sau interpretarea informațiilor din fișiere DXF sau DWG. De asemenea, garantează siguranța și conformitatea proiectelor prin efectuarea acestora respectând reglementările în vigoare. Printre instrumentele sale remarcabile se numără programul Portal Frame Generator, care facilitează generarea geometriei cadrelor rigide și a grinzilor simple și multiple, precum și generarea automată a încărcărilor din vânt și zăpadă. Prin combinarea programelor CYPECAD și CYPE 3D în același ecosistem, este posibilă integrarea structurilor formate din bare și noduri dezvoltate în CYPE 3D în structuri de tip cadru portal dezvoltate în CYPECAD, utilizând funcționalitatea „Structuri 3D integrate”. Cu această soluție, fiecare etapă a procesului de proiectare și analiză structurală este simplificată, oferind rezultate precise și fiabile.

7 Programe incluse

CYPECAD

CYPECAD is a BIM application for the design, analysis, and sizing of structures for building and civil works, which are subject to vertical and horizontal forces, as well as fire exposure.

CYPE 3D

CYPE 3D is an agile and efficient program created for the analysis and design of three-dimensional structures with elements made of concrete, steel, composite concrete and steel, aluminium, timber, or any other material, and includes the sizing of connections (welded and bolted connections of rolled and welded steel I sections and hollow structural sections) and their foundations with baseplates, footings, pile caps, and strap and tie beams.

Portal frame generator

Geometric generation of rigid portal frames and simple and multiple trusses. Automatic generation of wind and snow loads. Design and optimisation of roof and lateral purlins. Exports the geometry and loads to the program CYPE 3D.

StruBIM Shear Walls

StruBIM Shear Walls is a program with which users can design and check shear walls in accordance with the ACI 318-11, ACI 318-14, NTC-RSEE 2017, Eurocode 2 and Eurocode 8 codes.

StruBIM Deep Beams

StruBIM Deep Beams is a tool for the design of deep beams. This application is integrated in the Open BIM workflow using the IFC standard.

Foundation elements

Foundation elements designs several types of foundation elements: pile caps, baseplates, footings and strap beams. The program can automatically design and analyse the dimensions of the foundation element and reinforcement, as well as check the input of data, among other tasks.

CYPE Connect Classic

CYPE Connect Classic is a program for designing, checking, and generating the detailing and reports of welded and bolted connections with rolled and reinforced rolled-I sections; welded connections of circular hollow sections; and welded baseplates of steel columns.

62 Module incluse

AL9

The AL9 module allows CYPE 3D to use the extruded aluminium section editor, which is intended to facilitate the design and checking of aluminium alloy sections with special cross-sections.

APG

The APG module is compatible with CYPE 3D and allows the program to determine the critical load factors and buckling deformations of the structure for each combination analysed by solving an eigenvalue problem.

AUT

CYPECAD's AUT module has two options available that have been created to automatically generate the structure: Import of IFC files from CAD/BIM programs and Interpretation of DXF and DWG files.

C3D

The C3D module is the basic core of CYPECAD's tools and is required for the operation of all the program versions.

CIS

Transversal module available for several CYPE applications that allows users to export to the standard CIS/2 interchange format to facilitate the data flow between the apps involved in the process for the analysis, design and manufacturing of steel structures.

CNH

The CNH module is compatible with CYPECAD and is used to verify the requirements for the seismic design of reinforced concrete nodes.

ECL

The ECL module is compatible with CYPECAD and allows the program to analyse and design the reinforcement of stair slabs as isolated elements of the structure.

EEC

The CYPECAD module EEC allows users to carry out a dynamic analysis of buildings exposed to seismic loads, which includes the effect of the non-structural building elements used in the façades and partitions of a building.

ENZ

Using the ENZ module, CYPECAD and CYPE 3D can design foundations resolved using piles with their respective pile caps. This module also designs strap and tie beams spanning between the pile caps.

FPT

The CYPECAD module FPT, allows users to design the passive reinforcement of waffle slabs, in-situ joist floor slabs and their perimeter beams.

GEP

The GEP module is the basic module for using the Portal frame generator program and is a prerequisite for its operation. Geometry can be generated and loads can be applied on industrial warehouse-type structures, purlins can be analysed and the geometry and loads can be exported to CYPE 3D.

ITE

ITE is a CYPECAD module that allows users to consider the settlements of the foundations and their interaction with the rest of the structure, in terms of both forces and deformation, by defining elastic stiffness constants in foundation elements.

LFL

The LFL module allows CYPECAD to analyse and design mat foundations and foundation beams accurately and in accordance with structural design standards.

LMA

The LMA module is compatible with CYPECAD and allows the program to analyse and design flat slabs.

LMX

The LMX module is compatible with CYPECAD and allows the program to analyse and design composite slabs ("steel deck").

LPS

CYPECAD's LPS module has been designed to carry out the design of the passive reinforcement of post-tensioned slabs, using the forces that have been obtained from analysing the post-tensioned tendons (bonded or unbonded), whose properties have been introduced by the program users.

M3D

The M3D module is the basic core of the CYPE 3D tools and is required for the operation of all program versions. When combined with C3D, it facilitates the connection between structures designed in CYPE 3D and CYPECAD by means of the "Integrated 3D Structures" feature.

MAD

Using the MAD module, CYPECAD and CYPE 3D analyse and design timber beams and generic bars.

MAP

The MAP module is compatible with CYPECAD and allows the program to analyse and design concrete block masonry walls.

MEN

The MEN module allows CYPECAD to analyse and design corbels on column faces.

MLL

The MLL module is compatible with CYPECAD and allows users to include electrowelded meshes with the aim of using them in the analysis of flat slabs, as well as the detailing of these meshes and obtaining reports and drawings with their quantities.

MSG

The MSG module in CYPECAD analyses the column forces of a generic material, defined by its modulus of elasticity, Poisson's ratio and unit weight. It also evaluates the forces of generic reinforced concrete sections and verifies their longitudinal reinforcement.

MTP

CYPECAD’s module: MTP, designs reduced thickness reinforced concrete walls with a single reinforcement plane, which are used as load bearing walls to support vertical loads and also resist horizontal forces acting in the plane of the wall.

MUS

The MUS module is compatible with CYPECAD and allows the program to analyse and design concrete walls and masonry walls.

NLD

The NLD module is compatible with CYPE 3D and allows the program to perform non-linear analyses of supports with uplift.

NLR

This module allows users to insert plastic hinges into bars in CYPE 3D.

NLT

The NLT module is compatible with CYPE 3D and allows the program to perform the non-linear analysis of bars that work only in tension.

OSP

It is a transverse module available for several CYPE applications that activates the operation of the OpenSees (Open System for Earthquake Engineering Simulation) analysis engine for linear and non-linear structural analysis.

PAN

The PAN module allows users to analyse and design reinforced concrete shear walls in CYPECAD.

PHA

Using the PHA module, CYPECAD and CYPE 3D design rectangular and circular reinforced concrete columns.

PLA

With the PLA module, CYPECAD and CYPE 3D can design, edit and check welded baseplates for any steel column layout and any type of material (rolled, reinforced and cold formed steel).

PMD

With the PMD module, CYPECAD can analyse and design rectangular and circular section timber columns.

PMT

With the PMT module, steel columns can be introduced into CYPECAD so that they can be designed and built up according to the code selected.

PMX

Using the PMX module, CYPECAD and CYPE 3D design composite steel and concrete columns composed of rectangular or circular concrete columns with an encased steel section, Rolled steel plate box sections, filled with concrete; rectangular, square and circular hollow sections filled with concrete.

PPA

The PPA module is compatible with CYPECAD and allows the program to analyse and design hollow core floor slabs.

PUN

With the PUN module, CYPECAD checks the Failure Limit State of concrete for punching shear in flat slabs, waffle slabs and mat foundations using two methods.

Q04

With the Q04 module and computers equipped with several parallel processors, users can save a significant amount of time in the analysis process of the associated programs.

RET

The RET module is used to analyse and design waffle slabs in CYPECAD.

RMP

The RMP module is compatible with CYPECAD and allows the program to analyse and design ramp slabs as isolated elements of the structure.

SDV

This module is used by StruBIM Shear Walls to design and check diagonally braced coupling beams.

SDW

This is the core module for using StruBIM Shear Walls and is a prerequisite for running the program, as well as acquiring other modules.

SI6

The SI6 module carries out, in CYPECAD and CYPE 3D, the fire resistance check and design of sections or protection cover depending on the material in question.

UN1

The module "UN1" allows CYPECAD, CYPE 3D and Integrated 3D structures of CYPECAD to carry out an automatic analysis and design of I section welded connections (including baseplates).

UN2

The module "UN2" allows CYPECAD, CYPE 3D and Integrated 3D structures of CYPECAD to carry out an automatic analysis and design of I section bolted connections.

UN4

The module "UN4" allows CYPECAD, CYPE 3D and Integrated 3D structures of CYPECAD to carry out the automatic design of the most common bolted connections of rolled and welded steel I sections in building frames.

UN5

The "UN5" module for CYPECAD, its Integrated 3D structures and CYPE 3D, carries out an automatic analysis and design of coplanar hollow structural section connections, like those which are usually provided in flat trusses.

UNF

The UNF module is compatible with CYPECAD and allows the program to analyse and design reinforced and prestressed precast joist floor slabs.

UNI

The UNI module is used to analyse and design generic concrete joist floor slabs in CYPECAD.

UNM

The UNM module is compatible with CYPECAD and allows the program to analyse and design floor slabs with steel joists or open-web joists.

UNS

The UNS module is compatible with CYPECAD and allows users to analyse and design joist floor slabs with joists fully assembled on site.

USE

The module "USE" allows CYPECAD, CYPE 3D and Integrated 3D structures of CYPECAD to carry out the automatic design of the most common welded connections of rolled and welded steel I sections in building frames.

UVM

Using the UVM module, CYPECAD analyses and designs timber joist floor slabs.

VGT

This module is used to carry out the design of deep beams in StruBIM Deep Beams.

VHA

The VHA module is for use in CYPECAD and CYPE 3D and allows users to introduce and design various types of concrete beams.

VMT

With the VMT module, the following types of beams can be introduced and designed: steel beams below a floor slab or aligned with its upper face and composite steel beams linked to the floor slab with connectors.

ZAP

In CYPECAD and CYPE 3D, the ZAP module can be used to design foundations made of reinforced concrete rigid footings or mass concrete footings, either isolated or combined, tie and strap beams between footings and, in CYPECAD, strip footings for walls.

ZCA

In CYPECAD, the ZCA module is used to design foundations with special element intersections, establish polygonal limits of footings, and apply loads on footings, pile caps and strap and tie beams. In CYPE 3D, it facilitates the layout of polygonal limits for footings.

CP1

With this module, the CYPECAD, CYPE 3D and Foundation elements programs can calculate the sinking load in deep foundations using reinforced concrete piles.

CP2

With this module, the CYPECAD, CYPE 3D and Foundation elements programs incorporate the structural check of reinforced concrete pile caps for deep foundations.

CP3

With this module, the CYPECAD, CYPE 3D and Foundation elements programs incorporate the lateral stability analysis to facilitate the design of deep foundations subjected to significant lateral forces.

LLA

With this module, CYPECAD analyses and designs lightweight slab floors, formed by panels in which there are two different zones: lightweight and solid. Lightweight slabs are selected from the manufacturer's catalogues integrated in the program and available through the Open BIM Database.

NLV

The "Modal vibration analysis" module can be used to carry out a modal analysis of the structure in CYPE 3D.

Mai multe detalii despre acest pachet gasiti pe pagina producatorului: http://shop.cype.com/en/product/cypecad-m54-cype-3d-m28/